First Steps With The Programming Centre - RADEMACHER Fernotron Programming Centre Operating Instructions Manual

First steps with the Programming Centre

i
Buttons
1.
2.
2.a
1 or 2 lines
OK
or
2.b 3 lines
OK
16
Indication in the display
Automatic settings when
a DCF signal is
received
Insert batteries,
see page 58
The quality of reception of the
DCF signal is displayed. The
radio clock symbol flashes.
No DCF reception or weak DCF
reception (1 to 2 lines in the
display).
Confirm and automatically pro-
ceed with setting clock time and
date, see page 37.
Good DCF reception (3 lines in
the display).
Confirm and automatically pro-
ceed with displaying the current
weekday, date and clock time
(normal display).
ADVICE
It can take up to 5 minutes until a
radio signal is received.
The radio clock symbol
flashes:
if no DCF signal is received
after a two-week loss of the
DCF signal
Date
Time
Weekday