Weekly Timer - RADEMACHER Fernotron Programming Centre Operating Instructions Manual

Weekly timer

Weekday/weekend
Individual day timer
ADVICE
ADVICE
28
With the weekly timer you can set individual opening and closing
times.
Here you can set four switching times:
timer
1 x opening time
1 x closing time
1 x opening time
1 x closing time
Here you can set different opening and closing times for each
day of the week; 14 switching times in total.
The setting OFF and 0:00 does not result in a switching
command.Standardschaltzeiten AUF/AB (Gruppenfunktion)
The standard switching times are switched off (OFF) at first when
you activate the weekly timer.
Accordingly, only the switching times set in the weekly timer
are active.
The standard switching times can be switched on again in
addition. As a result you can set 4 switching times per day if
required.
You can allocate a separate weekly timer with different daily
switching times to each group. It is possible to change to a diffe-
rent group at any time, as the settings are permanently saved
after each input.
valid for Mon to Fri
valid for Mon to Fri
valid for Sat and Sun
valid for Sat and Sun