Manual Operation - RADEMACHER Fernotron Programming Centre Operating Instructions Manual

Manual operation

ADVICE
Buttons
1.
2.
3.a
3.b
STOP
3.c
4.
With the Fernotron Programming Centre you can manually
operate every group and every device (such as roller shutters/
light/garden pump etc.) connected to the Fernotron receivers.
Indication in the display
Manual operation of a group
You wish, for example, to manually
open all roller shutters in group 5
Select group 5
Set receiver to A (for all)
Example:
Open all roller shutters
Move the roller shutters to the
upper end position
Stop all roller shutters while
they are being raised
Close all roller shutters
ADVICE
If you wish to operate one particular
roller shutter, then in point 2 you
must not enter „A" but rather the
number of the desired receiver (e.g.
B. 3). All other functions are
handled the same way as the above
steps.
Manual operation of all groups
Set groups to „A" (all)
proceed with point 3.a to 3.c
and
57