RADEMACHER Fernotron Programming Centre Operating Instructions Manual page 12

Important advice before adjusting the settings
i
Allocation of names
Initial operation
Subsequent
changes ...
Using the
same names
Example
Numbering receivers
consecutively
12
You can allocate a name/a device number to each group and
each receiver (see page 47/pt. 2).
If you use the commissioning assistant (see page 17) you will be
automatically requested to select and enter the group and receiver
names.
...are possible at any time.
You can use names several times. To distinguish between receivers
with the same name, each receiver is given a different receiver
number.
In the living room there are 5 windows, and all 5 windows should
open and close at the same time.
You wish to allocate the name „living room" for the group and
for all receivers. This means that all receivers must be given a
consecutive number.
Group
Group 1
- Receiver 1
- Receiver 2
- Receiver 3
* The group and receiver name always appears at the top
of the display.
Group number
Name*
Living room
Living room
Living room
Living room
Group/receiver name
in moving text
Receiver number
Number
A
1
2
3