Changing The Standard Switching Times For Up/Down - RADEMACHER Fernotron Programming Centre Operating Instructions Manual

Standard switching times for UP/DOWN (group function)
The same switching
times for all days of
the week
ADVICE
Deactivating of
switching times

Changing the standard switching times for UP/DOWN

Buttons
1.
M
2.
/
OK
3.
4.
/
OK
5.
/
OK
6.
M
This function allows you to set an opening and closing time for
each group. The opening and closing times apply for all days of
the week.
You can allocate different opening and closing times for all groups
which you have set up.
The setting OFF and 0:00 does not result in a switching command.
Indication in the display
Open the menu
Select and open the standard
switching times (
Select group
e.g. group 5
Set the opening time ( )
(hours/minutes)
Set the closing time ( )
(hours/minutes)
Quit the menu.
ADVICE
If the automatic data transmission
was activated in expert mode (see
page 55, point 20, factory setting
= OFF), then you will be requested
to transmit data at this point (see
page 38).
)
27