Switching Off The Multi-Screen Functions; Temporarily Switching Off The Multi-Screen Function For The Master And Slave Devices; Advanced Multi-Screen Settings - Edirol V-440HD Owner's Manual

Other Operations
Switching Off the Multi-Screen
Functions
Using the master V-440HD, select "Off" in "1. Multi Screen On/Off"
under "12. Multi Screen" in the menu.
Temporarily Switching Off the
Multi-Screen Function for the
Master and Slave Devices
To temporarily switch off the Multi Screen function for the master
and slave devices, press the MIDI button so that the button's light
goes off. Multi Screen is not operational while the MIDI button light
is off.
46

Advanced Multi-Screen Settings

When using the Multi Screen function, the settings may need to be
changed if, for example, screens overlap due to the screen sizes and
positions.
Make advanced settings for the Multi Screen function from the menu
with "12. Multi Screen" (p. 63). The following parameters are
enabled.
12. Multi Parameter Settings Parameters
Multi Screen On / Off Switches the Multi Screen function on and off
Multi Screen Type Number of screens used with Multi Screen
Multi Screen ID V-440HD rank and screen position
Screen1 X Size Screen1 (master) screen horizontal size
Screen1 Y Size Screen1 (master) screen vertical size
Screen1 X Position Screen1 (master) screen horizontal position
Screen1 Y Position Screen1 (master) screen vertical position
Screen2 X Size Screen2 screen horizontal size
Screen2 Y Size Screen2 screen vertical size
Screen2 X Position Screen2 screen horizontal position
Screen2 Y Position Screen2 screen vertical position
Screen3 X Size Screen3 screen horizontal size
Screen3 Y Size Screen3 screen vertical size
Screen3 X Position Screen3 screen horizontal position
Screen3 Y Position Screen3 screen vertical position
Screen4 X Size Screen4 screen horizontal size
Screen4 Y Size Screen4 screen vertical size
Screen4 X Position Screen4 screen horizontal position
Screen4 Y Position Screen4 screen vertical position
Screen5 X Size Screen5 screen horizontal size
Screen5 Y Size Screen5 screen vertical size
Screen5 X Position Screen5 screen horizontal position
Screen5 Y Position Screen5 screen vertical position
Screen6 X Size Screen6 screen horizontal size
Screen6 Y Size Screen6 screen vertical size
Screen6 X Position Screen6 screen horizontal position
Screen6 Y Position Screen6 screen vertical position
Multi Reset Resets the above settings to the original factory
settings
About Manual Settings for the
Master and Slave V-440HDs
You can set the screen size and position of the master and slave V-
440HDs manually with the parameters "4. Screen1 X Size" to "27.
Screen6 Y Position."
* The values that can be set manually depend on the size of the final
video output.
* After making manual settings, the values for "4. Screen1 X Size"
to "27. Screen6 Y Position" are changed automatically when the
value in "2. Multi Screen Type" is changed.
* After making manual settings, changing the value in "1. HD/RGB
Output" (p. 58) may, depending on the settings, result in nothing
displayed by the slave devices. If this occurs, set the "2. Multi
Screen Type" value again, then redo the manual settings.