Edirol V-440HD Owner's Manual page 31

Selecting the Effect Applied when Switching
Buses (HD/RGB)
The effect applied when switching the video is selected by pressing
the TRANSITION buttons (HD/RGB).
Button Function
CUT Cut
MIX Dissolve
switching
WIPE PATTERN 1–6 Wipe switching
Description
The video switches
switching
when the video fader
(HD/RGB) reaches the
halfway point.
The video is mixed as
it gradually switches
according to the angle
of the video fader
(HD/RGB).
The video switches
with a wipe effect,
with the wipe corre-
sponding to the angle
of the video fader
(HD/RGB).
*This cannot be used
when the P in P effect (p.
33) is being used. If the P
in P effect is in use when
WIPE PATTERN 1–6 is se-
lected, MIX is selected au-
tomatically.
HD/RGB Section Operations
Customizing Wipe Transitions
The wipe switching effects assigned to the TRANSITION
(HD/RGB) WIPE PATTERN 1–6 buttons can be set from the
menu. You can make settings for the wipe pattern, direction,
and soft edge, and combine these settings in various ways to
create customized wipe transitions.
* For more on the menus, refer to "Menu Operations" (p. 25).
* When key composite effect (p. 36) in use, you can not use the
soft edge.
Wipe Patterns
Horizontal
Vertical
Horizontal Open
Vertical Open
Box
Cross
31