Edirol V-440HD Owner's Manual page 34

HD/RGB Section Operations
Adjusting the Position of the Sub-Screen (HD/RGB)
1.
Press the P in P button (HD/RGB).
The P in P button (HD/RGB) lights up.
2.
Press the LOCK button (HD/RGB).
The LOCK button (HD/RGB) is turned off.
At this time, operation of the POSITION/PAN joystick (HD/
RGB) is enabled.
3.
Move the POSITION/PAN joystick (HD/RGB).
Adjust the placement of the sub-screen while viewing the
screen.
Adjusting the Size of the Sub-Screen (HD/RGB)
1.
Press the P in P button (HD/RGB).
The P in P button (HD/RGB) lights up.
2.
Rotate the SIZE/ZOOM knob (HD/RGB).
Adjust the size of the sub-screen while viewing the screen.
P in P Settings Cleared When Power Is Turned Off
Be sure to save the P in P effect position, size, panning, and
zoom settings using the procedure described in "Saving the P in
P Effect Settings (HD/RGB)" (p. 35). Turning off the V-440HD's
power without saving the P in P settings will result in a loss of
the settings.
34
1 3 2
1 2
Adjusting the Panning for the Sub-Screen (HD/RGB)
1.
Press the PAN/ZOOM button (HD/RGB).
The PAN/ZOOM button (HD/RGB) lights up.
2.
Press the LOCK button (HD/RGB).
The LOCK button (HD/RGB) is turned off.
At this time, operation of the POSITION/PAN joystick (HD/
RGB) is enabled.
3.
Move the POSITION/PAN joystick (HD/RGB).
Adjust the panning in the sub-screen while viewing the screen.
Adjusting the Zoom in the Sub-Screen (HD/RGB)
1.
Press the PAN/ZOOM button (HD/RGB).
The PAN/ZOOM (HD/RGB) lights up.
2.
Rotate the SIZE/ZOOM knob (HD/RGB).
Adjust the zoom for the sub-screen while viewing the screen.
Restoring the Original Subscreen Pan
To return the pan in the subscreen to its original settings after
changing the pan with the procedure above, hold down the
PAN/ZOOM button for at least two seconds.
P in P Position, Size, Pan, and Zoom Settings
The settings processed with the above procedure are stored to
the lit P in P PATTERN button and saved until the V-440HD is
turned off. Use of the settings that have been changed with the
procedure above after the power is turned off requires that the
settings be saved to the V-440HD.
For more detailed information, refer to "Saving the P in P Effect
Settings (HD/RGB)" (p. 35).
1 3 2
1 2