Edirol V-440HD Owner's Manual page 61

5. HD/RGB Wipe Select
Settings for the TRANSITION buttons' (HD/RGB) WIPE PATTERN 1–6 are made here.
Parameters
5- 1. HD/RGB Wipe Sw 1
5- 2. HD/RGB Wipe Sw 2
5- 3. HD/RGB Wipe Sw 3
5- 4. HD/RGB Wipe Sw 4
5- 5. HD/RGB Wipe Sw 5
5- 6. HD/RGB Wipe Sw 6
TRANSITION Button (HD/RGB) Parameters
Parameters
1. Wipe Pattern
2. Wipe Reverse
3. Wipe Edge Type
4. Wipe Reset
* For more on wipe patterns, see p. 31.
6. SD Output
Settings for the SD section's output are made here.
Parameters
6- 1. SD Output Brightness
6- 2. SD Output Contrast
6- 3. SD Output Cb
6- 4. SD Output Cr
6- 5. SD Output Saturation
6- 6. SD Output Fader
6- 7. Color Bar
6- 8. SD Output Reset
7. SD Input
Settings for the input from the SD IN connectors are made here.
Parameters
7- 1. SD Ch 1
7- 2. SD Ch 2
7- 3. SD Ch 3
7- 4. SD Ch 4
SD Input Parameters
Parameters
1. SD Input Select
2. SD Brightness
3. SD Contrast
4. SD Saturation
5. SD Hue
6. SD Sw Enable
7. SD Reset
Explanation
Sets TRANSITION button (HD/RGB) WIPE PATTERN 1
Sets TRANSITION button (HD/RGB) WIPE PATTERN 2
Sets TRANSITION button (HD/RGB) WIPE PATTERN 3
Sets TRANSITION button (HD/RGB) WIPE PATTERN 4
Sets TRANSITION button (HD/RGB) WIPE PATTERN 5
Sets TRANSITION button (HD/RGB) WIPE PATTERN 6
Explanation
Wipe pattern setting
Wipe direction
Soft edge function
Resets the above settings to the orig-
inal factory settings
Explanation
Brightness adjustment
Contrast adjustment
Cb adjustment
Cr adjustment
Saturation adjustment
* Refer to "Fading Out the SD Section PGM
Output" (p. 41).
Test pattern output
Resets the above settings to the original factory
settings
Explanation
Sets video input to Channel 1 of the SD IN connectors
Sets video input to Channel 2 of the SD IN connectors
Sets video input to Channel 3 of the SD IN connectors
Sets video input to Channel 4 of the SD IN connectors
Explanation
Selects S-Video or composite for the SD input
Brightness adjustment
Contrast adjustment
Saturation adjustment
Hue adjustment
Selects Enable or Disable for the selected chan-
nel button
Resets the above settings to the original factory
settings
Menu Parameters
Values
* Refer to "TRANSITION Button (HD/RGB) Parameters."
* Refer to "TRANSITION Button (HD/RGB) Parameters."
* Refer to "TRANSITION Button (HD/RGB) Parameters."
* Refer to "TRANSITION Button (HD/RGB) Parameters."
* Refer to "TRANSITION Button (HD/RGB) Parameters."
* Refer to "TRANSITION Button (HD/RGB) Parameters."
Values
Horizontal, Vertical, Horizontal Open, Vertical Open, Box, Cross *
Off, On
Hard, Soft
—
Values
-128– +127
-32– +32
-32– +32
-32– +32
-64– +64
Off, On
Off, On
—
Values
* Refer to "SD Input Parameters."
* Refer to "SD Input Parameters."
* Refer to "SD Input Parameters."
* Refer to "SD Input Parameters."
Values
Auto, S-Video, Composite
-63– +63
-8– +7
-128– +127
-128– +127
Off, On
—
61