Edirol V-440HD Owner's Manual page 67

HIC C-BUS Channel Select
stxHIC:a;
a: Channel number (0: HD/RGB Channel A/B, 1: HD/RGB IN
Channel 1, 2: HD/RGB IN Channel 2, 3: HD/RGB IN Channel 3, 4:
HD/RGB IN Channel 4)
This selects the C-BUS channels.
ACK is returned by the V-440HD upon proper reception of the
command.
HID D-BUS Channel Select
stxHID:a;
a: Channel number (0: HD/RGB Channel A/B, 1: HD/RGB IN
Channel 1, 2: HD/RGB IN Channel 2, 3: HD/RGB IN Channel 3, 4:
HD/RGB IN Channel 4)
This selects the D-BUS channels.
ACK is returned by the V-440HD upon proper reception of the
command.
HTB Video Fader (HD/RGB) Position
stxHTB:a;
a: Video fader (HD/RGB) position (0–255, 0: C-BUS, 255: D-BUS)
This sets the video fader (HD/RGB) position.
ACK is returned by the V-440HD upon proper reception of the
command.
HTM TIME Knob (HD/RGB) Setting
stxHTM:a;
a: Time (0.0–4.0)
ACK is returned by the V-440HD upon proper reception of the
command.
HAT AUTO Button (HD/RGB) Setting
stxHAT:a;
a: Time (0.0–4.0)
This switches the D-BUS and C-BUS over the time set with the
number.ACK is returned by the V-440HD upon proper reception of
the command.
HTR TRANSITION Button (HD/RGB) Select
stxHTR:a;
a: TRANSITION button (HD/RGB) number (0:CUT, 1: MIX 2:WIPE
1, 3: WIPE 2, 4: WIPE 3, 5: WIPE 4, 6: WIPE 5, 7: WIPE 6)
This selects the TRANSITION button (HD/RGB) for the effect used
in switching in the HD/RGB section.
ACK is returned by the V-440HD upon proper reception of the
command.
HPS HD/RGB Section P in P Effect ON
stxHPS:a;
a: P in P status (0–5 (0: Off, 1–5: P in P PATTERN buttons (SD) 1–5
On))
This selects the P in P PATTERN button 1–5 used for the P in P effect
in the HD/RGB section.
ACK is returned by the V-440HD upon proper reception of the
command.
REMOTE Command Reference
HPI HD/RGB Section P in P Effect Setting
stxHPI:a,b,c;
a: P in P horizontal position (%) (-40 to 40)
b: P in P vertical position (%) (-40 to 40)
c: P in P size (%) (20 to 100)
This makes the settings for the P in P currently being displayed.
ACK is returned by the V-440HD upon proper reception of the
command.
HKS HD/RGB Section Key Composite On
stxHKS:a;
a: Key composite status (0–4 (0: Off, 1: White Key, 2: Black Key, 3:
Chroma Key 1, 4: Chroma Key 2))
This switches the HD/RGB section's key composite effects on and
off. It also sets the type of key applied when the effect is switched on.
ACK is returned by the V-440HD upon proper reception of the
command.
HKL HD/RGB Section Key Level
stxHKL:a;
a: Key Level (0–255)
This sets the key level in the HD/RGB section.
ACK is returned by the V-440HD upon proper reception of the
command.
PSE PANEL PRESET Select
stxPSE:a;
a: PANEL PRESET number (0–14: Panel Preset 1–15, 15: Factory
Preset)
This selects the PANEL PRESET settings.
ACK is returned by the V-440HD upon proper reception of the
command.
OUT OUTPUT FORMAT Button Select
stxOUT:a;
a: 0–2 (0: 1080i, 1: 720p, 2: RGB)
This selects the OUTPUT FORMAT button, changing the format of
the video output.
ACK is returned by the V-440HD upon proper reception of the
command.
FAD OUTPUT FADE Operation
stxFAD:a;
a: OUTPUT FADE status (0–255, 0: FADE MAX, 255: VIDEO MAX)
This sets the concentration during fadeouts of the video output from
the HD OUT and RGB OUT connectors.
ACK is returned by the V-440HD upon proper reception of the
command.
RST V-440HD Reset
stxRST;
This resets the V-440HD's panel status, with the Factory Presets
called up.
ACK is returned by the V-440HD upon proper reception of the
command.
67