Settings And Parameters; Hd Size16:9 Output - Edirol V-440HD Owner's Manual

Settings and Parameters

HD Size16:9 Output

Use the V-440HD's component output for shows and other situations where the video is being output to plasma displays or high-
definition projectors.
V-440HD Settings Parameters
Set the following parameters from the menu. Make parameter settings suited for the particular usage environment.
Settings Parameter
1. HD/RGB Output
2. HD/RGB Input
3. System
* For more on the menus, refer to Menu Operations (p. 25).
Settings Parameters for Devices Other Than V-440HD
It may be necessary to set the following parameters for connected plasma displays or high-definition projectors.
Settings Parameter
Output Device (e.g., plasma display, high-defini-
tion projector)
HD Video Output Device RGB Video Output Device
HD Camera PC or Other Device
Final Output (HD)
Plasma Display or Other Display
1. Output Format (1080i) sw,
etc.
5. Zooming
3. Pre Scaling Mode
4. Manual Pre Scaling
5. Scaling Type
(Channel input to RGB and
Channel A/B only)
1. System Frame Rate
Values
Set the input to "Component Input."
SD Video Output Device
DV Camera, Player, Etc.
Selects optimal format, e.g., 1080i or 720p,
for the connected device.
Set value to 100 when entire screen is not
being displayed.
There are times when the RGB video is not
displayed on the entire screen. Set the "3.
Pre Scaling Mode" to Manual and adjust
with the "4. Manual Pre Scaling" parame-
ter.
As the aspect ratio of the video in the RGB
and SD sections (Channel A/B) is not 16:9,
set this to "Fixed Aspect: Letter" or "Fixed
Aspect: Crop."
Select the format appropriate for the out-
put device you are using.
Related Page
p. 26
p. 58
p. 27
p. 59
p. 49
p. 64
79