Other Operations; Using The Panel Preset Buttons - Edirol V-440HD Owner's Manual

Other Operations

Using the PANEL PRESET
Buttons
You can save configurations of panel controller settings to the
PANEL PRESET buttons. Saving complex settings to the PANEL
PRESET buttons enables you to call up these settings without any
complicated operations just by pressing the PANEL PRESET
buttons.
A different configuration of settings can be saved to each of the
PANEL PRESET buttons 1–15.
Parameters saved as part of a panel preset
P in P PATTERN Buttons (SD)
P in P LOCK Button (SD)
LEVEL Knob (SD)
KEY ON Button (SD)
Key Type (SD)
Key Soft Edge (SD)
A-BUS Channel Button (SD)
B-BUS Channel Button (SD)
TIME Knob (SD)
Video Fader (SD)
TRANSITION Button (SD)
P in P PATTERN Buttons (HD/RGB)
P in P LOCK Button (HD/RGB)
PAN/ZOOM Button (HD/RGB)
LEVEL Knob (HD/RGB)
KEY ON Button (HD/RGB)
Key Type (HD/RGB)
Key Soft Edge (HD/RGB)
C-BUS Channel Button (HD/RGB)
D-BUS Channel Button (HD/RGB)
TIME Knob (HD/RGB)
Video Fader (HD/RGB)
TRANSITION Button (HD/RGB)
Panel Operation Mode
OUTPUT FADE MODE
OUTPUT FADE LEVEL
Multi Screen On/Off
Multi Screen Type
42
Saving PANEL PRESET Settings
To save PANEL PRESET settings, hold down the desired PANEL
PRESET button for at least two seconds. Once the PANEL PRESET is
saved, all of the PANEL PRESET buttons 1–8 flash.
Calling Up PANEL PRESET Settings
Press a PANEL PRESET button 1–8.
Factory Preset Related
The pressed button lights up, and the stored settings are called up.
Page
Settings in PANEL PRESET 9–15 can be accessed by pressing the
OFF p. 39
SHIFT button so it's lit, then pressing PANEL PRESET buttons 1–7.
ON p. 40
128 p. 41
OFF p. 41
Luminance Key2 p. 62
03 p. 62
1 ch p. 38
2 ch p. 38
1.0 p. 37
A-BUS p. 37
MIX p. 38
OFF p. 33
ON p. 34
POSITION/SIZE p. 34
128 p. 36
OFF p. 36
Luminance Key2 p. 60
03 p. 60
1 ch p. 32
2 ch p. 32
1.0 p. 30
C-BUS p. 30
MIX p. 31
A/B Mode p. 32
Auto p. 58
No fade p. 23
Off p. 46
2 x 1 p. 46
* The content of the V-440HD's internal memory cannot be written
to any external device.
* Pressing PANEL PRESET button 8 while the SHIFT button is lit
calls up the "Factory Preset" status (see table).
* Use of certain functions together may result in disruption of the
video images. We recommend testing settings configurations
beforehand when switching PANEL PRESET settings.
2 sec.