Edirol V-440HD Owner's Manual page 15

13. Video Fader (SD) ............................................................ (p. 37)
Moving the video fader up or down switches between the SD section
A-BUS and B-BUS.
Tilt the fader shown in the figure up to switch to the A-BUS; tilt the fader
down to switch to the B-BUS. The video switches using the effect selected
with the (15.) TRANSITION buttons (SD).
14. AUTO Button (SD).......................................................... (p. 37)
When the AUTO button (SD) is pressed, the SD section video switches
over the time indicated in the TIME display (SD).
The video switches using the effect selected with the (15.) TRANSITION
buttons (SD).
15. TRANSITION Buttons (SD) ............................................. (p. 38)
These are used to select the effect applied when switching the SD section
video with the video fader (SD) or the AUTO button (SD).
Button Function
CUT Cut switching
MIX Dissolve switching
WIPE Wipe switching
PATTERN
1–6
Description
The SD video switches when the
SD video fader reaches the half-
way point.
The SD video is mixed as it gradu-
ally switches according to the an-
gle of the SD video fader.
The SD video switches with a
wipe effect, with the wipe corre-
sponding to the angle of the SD
fader.
Names of Things and What They Do
15