Making Various Settings; Displaying Menus - Edirol V-440HD Owner's Manual

Basic Operation

Making Various Settings

The V-440HD's various settings are set from the menu. The menu is
displayed on the video monitor connected to the SD PREVIEW OUT
connector.

Displaying Menus

Press the MENU button to display the menu on the video monitor
connected to the SD PREVIEW OUT connector.
By holding down the SHIFT button and pressing the MENU
button, you can overlay the menu on the video from the HD
OUT connectors and HD PREVIEW OUT connectors, or from
the RGB OUT connectors and RGB PREVIEW OUT connectors.
* Depending on the RGB output settings, the size of menu
characters displayed via the RGB OUT/HD OUT connector
may change.
* This is a shortcut for switching the "11. HD On Screen
Display" function in "13. System" (p. 64) on and off.
24
TV Monitor
Menu
Parameters
Shown in Menu
1 HD/RGB Output
2 HD/RGB Input
3 HD/RGB PinP/
Zoom
4 HD/RGB Key
5 HD/RGB Wipe Select
6 SD Output
7 SD Input
8 SD PinP
9
SD Key
10 SD Wipe Select
11 Panel Preset Edit
12 Multi Screen
13 System
14 MIDI Setup
15
Factory Reset
About the Menu Hierarchy
The V-440HD's menus are organized as shown in the figure below.
The lowest level is where numerical values and other parameter
values are selected.
Press the ENTER button to go to a lower level in the menu. Press the
MENU button to move up a level.
Parameter
Parameter
1. HD/RGB Output
1-1: Output Format (1080i) Sw
1-2: Output Format (720p) Sw
1-3: Output Format (RGB) Sw
1-4: Output Format Sw Lock
2. HD/RGB Input
3. HD/RGB PinP/Zoom
MENU
Button
Closing the Menu
To close the menu, press the MENU button while the topmost level
is displayed.
Notes
Settings for the final output
Settings for the input from the HD/
RGB IN connectors
Settings for the HD/RGB section's P in
P effect
Settings for the HD/RGB section's key
composite effects
Settings for the TRANSITION buttons'
(HD/RGB) WIPE PATTERN 1–6
Settings for the SD section's output are
made here
Settings for the input from the SD IN
connectors
Settings for the SD section's P in P
effect
Settings for the SD section's key
composite effects
Settings for the TRANSITION buttons'
(SD) WIPE PATTERN 1–6
Screen for managing Panel
Presets
Settings for the Multi Screen output
The V-440HD's system settings
MIDI-related settings
This restores the V-440HD to its
original factory default settings.
Value
1080/60i, 720/60p....
1080/60i, 720/60p....
1280x1024, 1280x768, ....
On, Off
ENTER VALUE
Button Knob
Related
Page
p. 58
p. 59
p. 60
p. 60
p. 61
p. 61
p. 61
p. 62
p. 62
p. 62
p. 63
p. 63
p. 64
p. 65
p. 65