Making Various Settings; Displaying Menus - Edirol V-440HD Owner's Manual

Basic Operation

Making Various Settings

The V-440HD's various settings are set from the menu. The menu is
displayed on the video monitor connected to the SD PREVIEW OUT
connector.

Displaying Menus

Press the MENU button to display the menu on the video monitor
connected to the SD PREVIEW OUT connector.
By holding down the SHIFT button and pressing the MENU
button, you can display the video output from the HD OUT
connectors and HD PREVIEW OUT connectors, or from the
RGB OUT connectors and RGB PREVIEW OUT connectors in
the menu.
* This is a shortcut for switching the "11. HD On Screen Display"
function in "13. System" (p. 54) on and off.
24
TV Monitor
Menu
Parameters Shown
in Menu
1 HD/RGB Output
2 HD/RGB Input
3 HD/RGB PinP/Zoom
4 HD/RGB Key
5 HD/RGB Wipe Select
6
SD Output
7 SD Input
8 SD PinP
9 SD Key
10 SD Wipe Select
11
Panel Preset Edit
12 Multi Screen
13 System
14 MIDI Setup
15 Factory Reset
About the Menu Hierarchy
The V-440HD's menu comprises three different levels, as shown in
the figure below. The lowest level is where numerical values and
other parameter values are selected.
Press the ENTER button to go to a lower level in the menu. Press the
MENU button to move up a level.
Parameter
Parameter
1. HD/RGB Output
1-1: Output Format (1080) Sw
1-2: Output Format (1080) Sw
1-3: Output Format (1080) Sw
1-3: Output Format Sw Lock
2. HD/RGB Input
3. HD/RGB PinP/Zoom
MENU
Button
Closing the Menu
To close the menu, press the MENU button while the topmost level
is displayed.
Notes
Settings for the final output
Settings for the input from the HD/
RGB IN connectors
Advanced settings for the HD/RGB
section's P in P effect
Advanced settings for the HD/RGB
section's key composite effects
Settings for the TRANSITION but-
tons' (HD/RGB) WIPE PATTERN 1-6
Settings for the SD section's output
are made here
Settings for the input from the SD IN
connectors
Advanced settings for the SD sec-
tion's P in P effect
Advanced settings for the SD sec-
tion's key composite effects
Settings for the TRANSITION but-
tons' (SD) WIPE PATTERN 1-6
These settings are used to copy and
exchange panel presets
Settings for the Multi Screen output
The V-440HD's system settings
MIDI-related settings
This restores the V-440HD to its
original factory default settings.
Value
1280x1024, 1280x768, ....
1280x1024, 1280x768, ....
1280x1024, 1280x768, ....
On, Off
ENTER VALUE
Button Knob
Related
Page
P.48
P.49
P.50
P.50
P.51
P.51
P.51
P.52
P.52
P.52
P.53
P.53
P.54
P.55
P.55