Light Box; Backlight Highlight - Hisense HMD2G21S User Manual

Operational Instructions and Function Adjustment
Procedure:
1)
Press the button on the LCD monitor to go to the Mode screen.
2)
Press to select a proper display mode. In Custom mode, press
▲/▼ to adjust backlight brightness. In DICOM200, DICOM250,
DICOM300, DICOM350, DICOM400, DICOM450, DICOM500,
DICOM600, or DICOM700 mode, press this button to switch to
DICOM User mode.
3)
Press to return to the Home screen.
Note

The Mode screen disappears if no operations are
performed within 10 seconds.

Light Box


After power-on, you can set the LCD monitor to light
box mode.
Procedure:
1)
Press to go to the light box mode adjustment screen.
2)
Press again to enter light box mode.
3) Press any other button to exit light box mode.
Note

The light box feature is available only when no display mode is
selected or no menu is displayed.

Backlight Highlight


After power-on, you can set the LCD monitor to enter the backlight highlight state.
Procedure:
1) Press ▲ to enter the backlight highlight state.
2) Press any button to exit the backlight highlight state.
The backlight highlight feature is available only when no menu is displayed.
Custom
DICOM User
To exit light box mode, press any other
12
Mode
Enter light box mode?
If yes, press again.
button.