Mode Selection; Light Box - Hisense HMD3G21S User Manual

Operational Instructions and Function Adjustment

Mode Selection


When the LCD monitor is in the power-on state, you can select different display modes.
Mode Definition
DICOM Compliant with DICOM Part 14.
User mode Compliant with Gamma, with support for custom parameter settings.
Procedure:
1) Press the button on the LCD monitor to go to the Mode screen.
2) Press to select a proper display mode. In Custom mode, press
▲/▼ to adjust backlight brightness. In DICOM200, DICOM250,
DICOM300, DICOM350, DICOM400, DICOM450, DICOM500,
DICOM600, or DICOM700 mode, press this button to switch to
DICOM User mode.
3) Press to return to the Home screen.
Note

The Mode screen disappears if no operations are performed within
10 seconds.

Light Box


After power-on, you can set the LCD monitor to light box mode.
Procedure:
1) Press to go to the light box mode adjustment screen.
2) Press again to enter light box mode.
3) Press any other button to exit light box mode.
Note

The light box feature is available only when no display mode is
selected or no menu is displayed.
12
Mode
Custom
DICOM User
Enter light box mode?
If yes, press again.
To exit light box mode,
press any other button.