Set up your device
How to insert SIM card and
connect the battery
1. Gently remove FMU125 cover using plastic pry tool from both
sides.
2. Insert SIM card as shown with PIN request disabled or read our
Wiki
how to enter it later in
that SIM card cut-off corner is pointing outward from slot. SIM
slot 1 is closer to PCB, SIM slot 2 is the top one.
3. Connect battery as shown to device. Position the battery in place
where it does not obstruct other components.
4. After configuration, see "PC Connection (Windows)", attach device
cover back.
Figure 4 Cover removal
Teltonika
Configurator. Make sure
Figure 5 SIM card insert
Figure 6 Battery connection
6
Figure 7 Attaching cover back
FMU125 | Wiki