Set Up Your Device; How To Insert Micro-Sim Card And Connect The Battery - Teltonika FMB640 Quick Manual

Set up your device

How to insert Micro-SIM card and
connect the battery
1. Unscrew 4 screws counterclockwise that are located on the
bottom of the device.
2. Remove the cover.
3. Insert SIM card as shown with PIN request disabled or read
Security info how to enter it later in
Make sure that SIM card cut-off corner is pointing forward to
slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
4. Connect battery as shown to device.
5. After configuration, see "PC Connection (Windows)", attach
device cover back.
6. Screw in all screws. Device is ready to be mounted.
Teltonika Configurator.
Figure 5 Unscrew screws
Figure 7 Micro-SIM card insert
6
Figure 4 Cover removal
Figure 6 Battery connection
FMB640| Wiki