Table of Contents
Advertisement
PC Connection (Windows)
1. Power-up FMU125 with DC voltage (10 – 30 V) power supply
using supplied power cable. LED's should start blinking, see "LED
indications".
2. Connect device to computer using Micro-USB cable or Bluetooth
connection:
• Using Micro-USB cable
▬ You will need to install USB drivers, see "How to install USB
drivers (Windows)"
• Using Bluetooth
▬ FMU125 Bluetooth is enabled by default. Turn on Bluetooth
on your PC, then select Add Bluetooth or other device >
Bluetooth. Choose your device named –
"FMUxxx_last_7_imei_digits", without LE in the end. Enter
default password 5555, press Connect and then select
Done.
3. You are now ready to use the device on your computer.
How to install USB drivers
(Windows)
1. Please download COM port drivers from here.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
Setup will continue installing the driver and eventually the
confirmation window will appear. Click Finish to complete the setup.
Configuration (Windows)
At first FMU125 device will have default factory settings set. These
settings should be changed according to the user's needs. Main
configuration can be performed via
Get the latest Configurator version from here. Configurator operates
on Microsoft Windows OS and uses prerequisite MS .NET
Framework. Make sure you have the correct version installed.
Table 2 MS .NET requirements
MS .NET requirements
Operating
MS .NET Framework
system
version
Windows Vista
Windows 7
MS .NET Framework
Windows 8.1
4.6.2
Windows 10
Downloaded Configurator will be in compressed archive. Extract it
and launch Configurator.exe. After launch software language can be
changed by clicking
Language selection).
7
Teltonika Configurator
Version
Links
32 and 64 bit
www.microsoft.com
in the right bottom corner (Figure 8
FMU125 | Wiki
software.
Advertisement
Table of Contents
