Default configuration has optimal parameters present to ensure best
performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
"
setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
Note: Before SMS text, two space symbols should be inserted.
GPRS settings:
2001 – APN
•
2002 – APN username (if there
•
are no APN username, empty
field should be left)
2003 – APN password (if there
•
are no APN password, empty
field should be left)
Server settings:
2004 – Domain
•
2005 – Port
•
2006 – Data sending protocol (0
•
– TCP, 1 – UDP)
Default configuration settings
Movement and ignition detection:
Vehicle movement will
be detected by
accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes
Vehicle drives 100
meters
Device makes a record On Stop if:
1 hour passes while
vehicle is stationary and
ignition is off
Records sending to server:
If device has made a
record it is sent to the
server every 120
seconds
After successful SMS configuration, FMU125 device will synchronize
time and update records to configured server. Time intervals and
default I/O elements can be changed by using
Configurator
or
SMS
parameters.
9
Ignition will be detected
by vehicle power voltage
between 13,2 – 30 V
Vehicle turns 10 degrees
Speed difference between
last coordinate and
current position is greater
than 10 km/h
Teltonika
FMU125 | Wiki