Set Up Your Device; How To Insert Micro-Sim Card And Connect The Battery - Teltonika FMM130 Quick Manual

Set up your device

How to insert Micro-SIM card and
connect the battery
1. Gently remove FMM130 bottom cover using plastic pry tool from
both sides. Then remove the top cover.
2. Insert Micro-SIM card as shown with PIN request disabled or
read our Wiki how to enter it later in
Make sure that Micro-SIM card cut-off corner is pointing forward
to slot.
3. Connect battery as shown to device. Position the battery in place
where it does not obstruct other components.
4. After configuration, see "PC Connection (Windows)", attach device
top and bottom cover back.
Figure 4 Cover removal
Teltonika Configurator.
Figure 5 SIM card insert Figure 6 Battery connection
6
Figure 7 Attaching cover back
FMM130 | Wiki