Table of Contents
Advertisement
Safety information
This message contains information on how to operate FMU125 safely. By
following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and follow
them strictly before operating the device!
•
The device uses SELV limited power source. The nominal voltage is +12 V
DC. The allowed voltage range is +10..+30 V DC.
To avoid mechanical damage, it is advised to transport the device in an
•
impact-proof package. Before usage, the device should be placed so that
its LED indicators are visible. They show the status of device operation.
When connecting the 2x6 connector wires to the vehicle, the appropriate
•
jumpers of the vehicle power supply should be disconnected.
Before unmounting the device from the vehicle, the 2x6 connector must
•
be disconnected. The device is designed to be mounted in a zone of
limited access, which is inaccessible to the operator. All related devices
must meet the requirements of EN 60950-1 standard.
The device FMU125 is not designed as a navigational device for boats.
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated
or the isolation is damaged, DO NOT touch the
device before unplugging the power supply.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in a predefined
location.
The programming must be performed using a PC
with autonomic power supply.
Installation and/or handling during a lightning
storm is prohibited.
The device is susceptible to water and humidity.
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according
to the instructions.
14
FMU125 | Wiki
Advertisement
Table of Contents
