Set up your device
How to insert SIM card and
connect the battery
1. Gently remove FMU126 cover using plastic pry tool from both
sides.
2. Insert SIM card as shown with PIN request disabled or read
our
Wiki
how to enter it later in
sure that SIM card cut-off corner is pointing outward from slot.
SIM slot 1 is closer to PCB, SIM slot 2 is the top one.
3. Connect battery as shown to device. Position the battery in
place where it does not obstruct other components.
4. After configuration, see "PC Connection (Windows)", attach
device cover back.
Figure 4 Cover removal
Teltonika
Configurator. Make
Figure 5 SIM card insert
Figure 6 Battery connection
6
Figure 7 Attaching cover back
FMU126 | Wiki