Editing/Removing A Sunny Webbox - SMA POWER REDUCER BOX User Manual

SMA Solar Technology AG
8.2.2 Editing/Removing a Sunny WebBox
These settings may only be configured by skilled persons
The settings in this section may only be configured by a skilled person
(see Section 2.3 "Qualification of Skilled Persons", page 11).
Do not remove or edit Sunny WebBoxes while the Power Reducer Point is actively
sending setpoints
If you edit the configuration of Sunny WebBoxes in your plant or remove Sunny WebBoxes
from your plant while the Power Reducer Box is sending an instruction to the them, the signal
from the Power Reducer Box may not be translated correctly.
• Do not remove any Sunny WebBoxes and do not change any Sunny WebBox IP
addresses in the Sunny WebBox registration if an active power limitation (< 100%) or a
reactive power setpoint is currently active.
Editing a Sunny WebBox
1. Select "Sunny WebBox registration" in the context menu.
2. In the list of Sunny WebBoxes, click "Edit"
☑ The Sunny WebBox to be edited is displayed in the upper area.
3. Adjust the Sunny WebBox settings.
4. Select [Save].
☑ The Sunny WebBox is displayed in the list of Sunny WebBoxes with the changed values.
Removing a Sunny WebBox
1. Select "Sunny WebBox registration" in the context menu.
2. In the list of Sunny WebBoxes, click "Remove"
☑ The Sunny WebBox is deleted from the list.
User Manual
next to the desired Sunny WebBox.
next to the Sunny WebBox to be removed.
REDUCERBOX-BA-en-16
8 Commissioning
39