Connecting Power; Installing A Hard Disk - Advantech UNO 2173A/AF User Manual

3.3 Connecting Power

Connect the UNO-2173A/AF to a 9~36 VDC power source. The power
source can either be from a power adapter or an in-house power source.

3.4 Installing a Hard Disk

The procedure for installing a hard disk into the UNO-2173A/AF is
below. Please follow these steps carefully.
1. Remove the power cord.
2. Unscrew the six screws from the bottom panel.
3. Install the HDD on the HDD bracket.
4. Connect the SATA signal cable to CN21 and connect SATA power
cable to CN 22, then connect the other side of the cable to the
SATA hard disk.
5. Screw back the bottom panel with the six screws.
19 Chapter 3