Waveform Generation In The Fg Mode - YOKOGAWA WE7281 User Manual

1.6 Waveform Generation in the FG Mode

Selecting the Output Waveform (Function)
1-8
Select the output waveform from the following list of choices. You can also select
waveform inversion.
Sine wave
Generates a sine wave with a frequency between 1 mHz and 20 kHz.
Inversion
Pulse wave
The selectable oscillation frequencies range from 1 mHz to 10 kHz. A pulse waveform of
0 to 100% duty cycle can be generated.
Inversion
Ramp wave
The selectable oscillation frequencies range from 1 mHz to 10 kHz.
Inversion
Triangular wave
Generates a triangular wave with 50% symmetry. The selectable oscillation frequencies
range from 1 mHz to 10 kHz.
Inversion
Arbitrary waveform
An arbitrary waveform can be generated by loading the arbitrary waveform data (data
length is fixed to 64 Kwords). The selectable oscillation frequencies range from 1 mHz
to 10 kHz.
Inversion
DC
The selectable output voltage is the same as the possible output range corresponding to
the output voltage range setting.
IM 707281-01E