YOKOGAWA WE7281 User Manual page 32

IM 707281-01E
3. The following dialog box appears. Clicking the [OK] button causes the number of
channels and blocks of the waveform data to be automatically determined, and the
waveform data to be loaded.
Note
• When loading waveform data, the data length of all channels in the same block must be of the
same length for the data to load properly. When loading a file in wvf format containing
computed waveforms, the data length may be different. Check the data length of each channel
by checking Block size in the dialog box.
• For waveform files in csv format, only one block can be loaded.
Manual Load
Load the waveform data according to the following procedure.
1. Set the number of channels (CH Mode) and the number of memory partitions (Memory
Partition) of the waveform data to be loaded.
2. In the menu that appears by clicking the [Manual] button, select the slot/channel
number to which the waveform data are to be loaded.
When the 4-CH, 100 kS/s D/A modules are not linked, only the slot number of the
selected module is displayed. When the modules are linked, the slot numbers of all
slots that have modules installed are displayed.
3. Select the block number to which the data are to be loaded in the [Block No.] list box.
4. Clicking the [Load Data] button displays the following dialog box.
3.3 Setting the Output Condition in the AG Mode
Select the file
3
3-7