Chapter 3 Waveform Acquisition; Setting Conditions For Waveform Acquisition (Scope Mode) - YOKOGAWA ScopeCorder DL350 User Manual

Chapter 3 Waveform Acquisition
3.1 Setting Conditions for Waveform Acquisition
(Scope mode)
This section explains the following settings for acquiring waveforms.
Applicable to Scope Mode
• Basic settings (time scale, record length, acquisition mode, waveform acquisition count)
• Detail settings (time base, trigger position, trigger delay)
• Action/SD recording (action (action mode, action settings), SD recording (auto naming, file name,
detail settings)
For recorder mode, see section 3.2.
Waveform Acquisition Basic Setting Menu
1.
On the waveform screen, tap MENU > Acquire. The Acquire menu appears.
2.
Tap the Basic tab.
3.
Tap each item. Use the displayed list (options) or input box to set the items.
(Can be adjusted in steps)
Acquisition Settings (Acquisition Setup)
4. Tap Acquisition Setup. Tap Acquisition Mode. Use the displayed list (options) to select the
acquisition mode.
Acquisition Mode
Normal:
Envelope: Displays waveforms in envelope mode. Set the waveform acquisition count.
Average:
• Normal Mode (Normal), Envelope Mode (Envelope)
IM DL350-02EN
Time scale Record length
(Tap + or – to adjust.)
Displays waveforms without processing the sampled data. Set the waveform acquisition
count.
Displays averaged waveforms. Set the average count or attenuation constant.
Waveform acquisition count
(Tap + or – to adjust.)
► Features Guide: "Waveform Acquisition"
Acquisition settings
Set to Normal or Envelope.
3-1