YOKOGAWA WE7281 User Manual page 33

3.3 Setting the Output Condition in the AG Mode
3-8
5. Clicking the button to the left of the [OK] button opens the [Open] dialog box. Select a
file with extension [*.wvf] or [*.csv] and click the [Open] button.
6. The setup data of the file being loaded appear in a dialog box as shown below. Select
the channel and block that are to be loaded in the [Trace Name] and [Block No.] list
boxes, respectively.
7. Click the [OK] button to load the waveform data to the channel that was selected in
step 2. Only one block of a channel can be loaded with one operation.
Select the name of the desired
channel
Select the desired block number
IM 707281-01E