3.4 Setting the Output Condition in the FG Mode
Loading Arbitrary Waveform Data
3-12
Load the arbitrary waveform data according to the following procedure.
1. Clicking the [Load ARB] button displays the following dialog box.
2. Clicking the button to the left of the [OK] button opens the [Open] dialog box. Select a
file with extension [*.wvf], [*.csv], or [*.s16] and click the [Open] button.
3. The setup data of the file being loaded appears in a dialog box as shown below.
Select the channel and block that are to be loaded in the [Trace Name] and [Block
No.] list boxes, respectively.
4. Click the [OK] button to load the arbitrary waveform data.
Select the file
Select the channel to be loaded
Select the block number to be loaded
IM 707281-01E