Selecting The Measurement Method - Omron HEM-9000AI Instruction Manual

Selecting the Measurement Method

Selecting the Measurement Method
This device has the following three measurement options: AI + blood pressure measurement
( below), blood pressure measurement (
1
the measurement option by pressing the F1 key [MODE] until the desired option is selected
[Fig. 29-32].
Measuring both AI and blood pressure. (Refer to
1
"AI + Blood Pressure Measurement" on page 29.)
The AI and blood pressure can be measured either
automatically, alternating between the two
measurements using one arm (AI/blood pressure
measurement), or almost simultaneously using
both arms (AI/blood pressure simultaneous
dual-arm measurement).
(Refer to "How to Change the Measurement
Settings" on pages 59 - 61.)
Measuring Blood Pressure Only (Refer to "Blood
2
Pressure Measurement" on page 34.)
Measuring AI Only (Refer to "AI Measurement" on
3
page 38.)
below), and AI measurement (
2
28
below). Change
3
[Fig. 29]
[Fig. 30]
[Fig. 31]
[Fig. 32]