Table of Contents
Advertisement
Press the release button at the top of the main unit to open the printer cover.
1
[Fig. 8 and Fig. 9]
[Fig. 8]
Load the specially designed printer paper into the holder in the direction shown in the
2
diagram. [Fig. 10]
* Make sure you use Omron
[Fig. 10]
With a small amount of paper sticking out, push the cover closed until it locks into place.
3
[Fig. 11]
[Fig. 11]
General Preparation
®
printer paper, refer to page 12.
Printed side up
[Fig. 9]
Load the printer paper as shown in the diagram.
* Pull out the paper so that it protrudes from the
printer cover when closing.
When loading a new roll of paper, pull the end out
about 25cm (10 inches). The end of the roll is
sealed with glue, which does not make a suitable
printing surface.
* When the power is on, the paper will
automatically advance and cut.
21
Loading Printer Paper
Advertisement
Table of Contents
