Bomar Ergonomic Automat Series Operating Instruction page 47

3. After the lift adjustment has been checked, secure the adjustable cube by
the securing lever.
3.5.9. Pressure adjusting to the cut
The band saw ergonomic is equipped with cutting pressure regulation on the
right guiding cube.
Pressure setting is performed with regulation wheel on the guiding cube.
•
Screw on the wheel – downfeed pressure is bigger.
•
Screw off the wheel – downfeed pressure is smaller.
One visible neck
• Solid material over ∅200 mm
Two visible necks
• Plný materiál do ∅80 - ∅200 mm.
Three visible necks
•
Pipes and shaped material with surface from 10 - 15
mm
•
I- shaped material from 200 - 280 mm
• Solid material to ∅80 mm
47