Bomar Ergonomic Automat Series Operating Instruction page 34

3.3.
3.3.1.
3.3.2.
34
Automatic mode (cycle)
Cycle preset
Turn switch 12 to position „
Preset:
" Mode: AUTO
" Length:
" Pieces:
"
F1
1. Adjust the length of blank. Press button E
Note:
The maximum length of one feed is 500 mm. If you set the
longer length than 500 mm (for example 750 mm), the
program is automatically divided on 2 or more feeds (in
our example is divided on 2 feeds). The way of dividing
appears on the screen. Press button F2 or F3
"Input:
"Set:
"Repeat:
"
F 1
" Mode: AUTO
" Length:
" Pieces:
"
F1
2. Adjust the pieces number. Press button F4. Automatic mode is pre-set.
" !!
"
"
"
F1
3. Set the feeding length on the value, which is depicted on the screen – see
chapter Feeding length setting.
4. Press button F2 or F3
Automatic cycle with material cutting
Chcete-li před zahájením naprogramovaného automatického cyklu zaříznout
konec materiálu, postupujte následovně:
1. Po ukončení programování automatického cyklu proveďte následující.
" to pre-set the automatic cycle.
"
0.0 mm "
0 Pcs"
<DONE>"
F 2 F 3
750.0 mm "
375.7 mm "
2 "
<OK> "
F 2 F 3
"
0.0 mm "
0 Pcs"
<DONE>"
F 2 F 3
Set length !! "
375.7 mm "
"
<OK> "
F2 F3
Manual version: 1.02 / Mar. 2010
Manual rev.: 1