42
Band saw Ergonomic 320.250 GAC could make angle cuttings varied from 0°
to +60°. Angles 0° and +60° are set by means of the fixed stop.
Picture
How to
1.
Lift the saw arm by pressing button "Lift
the saw arm"
2.
Release the securing lever.
3.
Pull out the stop pin. The turning console
is not blocked.
4.
Swivel the saw arm to the desired
cutting angle.
The scale is situated on the side of the
turning console.
5.
Check the adjustment according to the
scale.
6.
Pull the securing lever again.
Manual version: 1.02 / Mar. 2010
Manual rev.:
1