Maintenance & Troubleshooting; Pairing Replacement Or Additional Components; Battery Replacement - Lightspeed Active User Manual

MAINTENANCE & TROUBLESHOOTING

Pairing Replacement or Additional Components

When purchased as a complete system, components (whole-class audio system,
Flexmike, Activate and Pods) will be paired and ready for use, so there is no need to
manually pair anything.
In the event a component needs to be replaced or an additional component is added
down the road, it will need to be paired. Please refer to the Pairing Guide provided with
the new components or visit lightspeed-tek.com.

Battery Replacement

The Pods and microphones contain rechargeable battery packs that require daily charging.
The battery packs are covered under warranty for 1-year but have a useful life of about 2+
years before they should be replaced. The battery packs must be purchased directly from
Lightspeed and can easily be installed by the user (part # 77.NH2.5-A).
Replacement of battery pack in Pod
• Slide the battery door open.
• Pull the battery pack out and disconnect the cable.
• Connect the cable to the new battery pack and insert the battery into the compartment.
RECHARGEABLE
• Slide the cover back on.
BATTERY PACK
• Place the Pod in the Activate station to fully charge the new battery pack. The charging
light will turn red while charging, and green when fully charged (up to 10 hours).
29