Record Audio And Capture Video - Lightspeed Active User Manual

Record Audio and Capture Video

Video + Audio Recording
The Activate mobile app allows teachers to utilize their device video camera synced
together with the Activate system audio to capture key moments in the classroom.
Through the Bluetooth audio link, the App will seamlessly sync up the selected audio
source (teacher microphone or Pods) with the video you have recorded.
TAP THE RECORD TAB
• Verify the Bluetooth audio connection is present as indicated by a "headphone" icon
in the lower left hand corner of the screen.
• Select Video capture at the top of the screen.
SELECT DESIRED AUDIO SOURCE
• Note the selected source indicated in the upper left hand corner of the screen.
• If you wish to change the source, swipe right on the screen to reveal the control arc.
• To record teacher audio only, select the class button. Make sure your microphone is
unmuted.
• To record student group audio, select the desired Pod.
NOTE: For optimum student audio quality, the teacher microphone should be muted.
BEGIN RECORDING
• Select front or back camera.
• Tap the red record button to begin the video recording.
• To pause the video recording, tap the pause button.
• To end the recording, press the stop button.
• You will see the last recorded video appear as a thumbnail for quick review.
• To capture a still photo during the recording, tap the white shutter button.
CAPTURE STILL PHOTO
• Select front or back camera.
• Tap white button at the bottom of the screen.
21
VIDEO
CAPTURE
SELECTED
SELECT FRONT
POD SOURCE
OR BACK CAMERA
CONTROL
ARC
SELECT
WHOLE
CLASS
START
RECORDING
VIDEO OR
AUDIO
STILL
PHOTO
SELECT FRONT
OR BACK CAMERA
CAPTURE
STILL
PHOTO