Output To Assistive Listening Device (Ald) - Lightspeed Active User Manual

Output to Assistive Listening Device (ALD)

• Turn the AUDIO OUTPUT volume control on the Activate Station front panel all the way down.
• Connect a patch cable from the ALD's microphone jack or AUX input to one of the 3.5mm
AUDIO OUTPUTS on the back of the Activate Station.
• With both the Lightspeed classroom audio system and ALD turned on, speak into the
Flexmike and slowly adjust the AUDIO OUTPUT volume control on the front Activate until the
appropriate audio level is attained in the ALD receiver's headphones.
• It may be necessary to adjust the volume on the ALD to achieve appropriate volume level.
17
Audio Inputs
3.5MM AUDIO JACK
Determine the size and type of audio input jack
on the device as many manufacturers' products
differ in connector size and shape. Most ALD
transmitters require a 3.5mm to 3.5mm patch
cable (part# MSC3535).
Charge Out (5V USB
Charging Disabled When Aux Power Used
Access
Audio Outputs Bluetooth Pairing Phone/Pods
Pair
1.0A
1 2
Power
Pods/Remote
24VDC/1.75A
Aux
500mA
Power Input
5VDC/0.3A
ALD TRANSMITTER