Pair Your Mobile Device To The Activate Station - Lightspeed Active User Manual

Pair your Mobile Device to the Activate Station

FIRST, DOWNLOAD THE ACTIVATE APP
Activate Pods can be controlled by the teacher microphone or the Lightspeed Activate
App which can be downloaded from the iOS App Store or Google Play Store:
PAIRING WITH THE ACTIVATE APP
• Open the Activate App on your device and make sure Bluetooth is turned on.
• You will see a set of instructions that will take you through the two pairing
processes.
• Begin by pressing the Bluetooth 1 pairing button on the back of your Activate
Station to connect to the Lightspeed system for remote control functionality.
Once paired, any registered Pods, if purchased, will appear on the mobile app.
• You can now pair to Bluetooth audio. The app will take you through a pairing
guide and will instruct you to go to your mobile device Settings>Bluetooth.
Choose your Activate Station number (ACT_XXXX_BT1) from the list of
unpaired devices.
• Next enter the pin #0000 to complete the pairing process.
• Press the pair button within the app when prompted. The device should now
show as connected.
• Return to the Activate mobile app. It will take you through a tutorial on how to
use the various functions, including some additional functions available only
through the app.
• If there is a second Flexmike for team teaching, repeat the above process with
a second mobile device and press the Bluetooth 2 button on the back of the
Activate Station.
12
ACTIVATE APP
When using the Activate
App, refer to the tutorial
within the app.
Charge Out (5V USB
Charging Disabled When Aux Power Used
Access
Audio Inputs Audio Outputs Bluetooth Pairing Phone/Pods Pods/Remote
Pair
1.0A
1 2
BLUETOOTH 1 PAIRING BUTTON
Power
24VDC/1.75A
500mA Aux
Power Input
5VDC/0.3A