Lightspeed Active User Manual page 22

Record Audio and Capture Video
Audio Only Recording
In addition to video recording, teachers can record just the audio of a lesson or
student interaction.
TAP THE RECORD TAB
• Verify the Bluetooth audio connection is present as indicated by a "headphone" icon
in the lower left hand corner.
• Select Audio at the top of the screen.
SELECT DESIRED AUDIO SOURCE
• Note the selected Pod source indicated in the upper left hand corner of the screen.
• If you wish to change the source, swipe right to reveal the control arc.
• To record teacher audio only, select the class button. Make sure your microphone is
unmuted.
• For student audio, select the desired Pod.
NOTE: For optimum student audio quality, mute the teacher microphone.
BEGIN RECORDING
• Tap the red record button to begin the audio recording.
• To capture a still photo during the recording, tap the white shutter button.
• To end the recording, press the stop button.
• You will see the last recorded audio file appear as a thumbnail for quick review.
22
(cont.)
AUDIO
RECORDING
SELECTED
POD SOURCE
CONTROL
ARC
SELECT
WHOLE
CLASS
START
RECORDING
VIDEO OR
AUDIO