Table of Contents
Advertisement
Appendix 3. Replacing the Menu Display
The following procedure shows how to replace the menu display.
Replacement is able to be performed while the main unit power is on.
1.
Unfasten to remove the four fixing screws on the front panel sides and detach the front panel.
2.
Turn off the menu display power supply by
turning the dip switch to the OFF position.
3.
Remove the four screws (circled).
4.
Pull out the menu display.
5.
Grab the handle and slowly pull out the
FRONT_MENU_CARD.
6.
Insert a new FRONT_MENU_CARD to all the way
in.
7.
Confirm that the dip switch on the new menu display
is set to the OFF position.
8.
Install the new menu display into the
FRONT_MENU_CARD connector.
9.
Re-install the screws removed in Step 3.
10. Turn on the menu display power supply by turning
the dip switch to the ON position.
Menu display replacement is now complete.
FRONT_MENU_CARD
73
(2)
Handle
Advertisement
Table of Contents
