Channel Name Request Commands (7) - FOR-A MFR-6000 Operation Manual

6-3-3. Channel Name Request Commands (7)

K? commands allow you to obtain Source and Destination names in ASCII and/or in Kanji set
in the MFR Web-based Control menu.

Command Format
Command
@[sp]K?<S or D><A or K>,<Offset>
Commands
BYTE No. 1 2
Command @ [sp]
Command response
BYTE No. 1 2
Response CR LF
BYTE 5
Command
Response
BYTE 6
Command BYTE8-10
Response BYTE7-9
Response BYTE11-
CR
Command
Response
LF
Up to 32 channel names can be obtained per request.
Note that if the number of request channels exceeds the system maximum size, no data will return for
the exceeded channels.
► See the [Web-based Control: SystemSize/LevelName page].
K:<SorD><AorK><No.>,<Dat>
3 4 5 6
K ? S A
D K
3 4 5 6
K : S A
D K
<S or D>
Select between S (Source) or D (Destination)
S: Source, D: Destination
<A or K>
Select A (Ascii) or K (Kanji) for names.
<Offset>
Specify the start number of channels.
Source: 000-3FF, Destination: 000-1FF
<No.>
Indicates the channel number.
Source: 000-3FF, Destination: 000-1FF
<Dat>
Indicates the short or long channel name using hex characters
(max. 128 bytes).
Character code for Ascii names: Ascii
Character code for Kanji names: UTF-8
Carriage return
Line feed
56
Command response
7 8-10 11
, 000-3FF CR
000-1FF
7-9 10 11-
000-3FF ,
000-1FF
CR LF