Sdi Bnc Output Settings - FOR-A MFR-6000 Operation Manual


Adding 8K Quad-Link Payload ID Information.
When converting 3G Quad-Link to 12G-SDI, Payload ID information for 8K Quad-Link (In
compliance with SMPTE 2082-1) is able to be added to 12G-SDI output. Set as shown below.
From
12G(8K Link1)
3G
12G(8K Link2)
Quad-Link
12G(8K Link3)
(2SI or SQD)
12G(8K Link4)
When adding 8K Quad-Link Payload ID information to Gearbox 1, make sure to also add the
information to Gearbox 2 as shown below. Use different Link Numbers.
Ex.)
Gearbox
GB1 3G(SQD)
GB2 3G(2SI)
5-3-6. 3G-SDI BNC Output Settings
When converting 3G Quad-Link to 12G-SDI, 3G-SDI Black or 12G-SDI Link 1 are selectable
for remaining 3 SDI output signals.
To Payload ID
Insert
Insert
Insert
Insert
From
To (Yes)
12G(8K Link1)
12G(8K Link2)
49
Payload ID Information to Be Added
8K Quad-Link, Link1
8K Quad-Link, Link2
8K Quad-Link, Link3
8K Quad-Link, Link4
To (No)
12G
12G(8K Link2)