Rear Panel - FOR-A MFR-6000 Operation Manual

2-4-2. Rear Panel

B
SERVICE 1 2
MFR-LAN GPI 1
A E
No. Item
*1
A MFR-LAN
B SERVICE
C DC12V IN 1, 2
D SERIAL1 - 4
GPI 1
E
(Port no: 1)
GPI 2
F
(Port no: 2)
GPI 3
G
(Port no: 3)
GPI 4
H
(Port no: 4)
*1
The MFR-LAN connector may be labeled 10/100BASE-T on the previous model.
D
SERIAL
3 4
RATING LABEL
GPI 2
F
Used to connect the MFR main unit
Ethernet port (10/100 BASE-TX)
Used for maintenance only. Do not use.
Used to supply 12V DC power.
Used for serial interface control. The default setting is RS-232C.
RS-422 is also selectable using switches on the internal card.
► See Sec. 2-4-4. "Card Switches
Pin assignments are the same as those on the MFR main unit.
► See Sec. 2-2-1. "Interfaces."
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
Used for GPI input / output connections.
(32 total assignable inputs and outputs)
22
GPI 3 GPI 4
G H
Description
2 -DC12V IN- 1
C