Mv Settings; Setup Menu - FOR-A MFR Series Operation Manual

5-6. MV Settings

This page is available only for MFR-3000 units into which an optional MFR-16MV is installed.
► See Sec. 7 "Multiview Output" in the MFR-3000 Operation manual for more details on how to
output multiview images.
MV channel tabs
Layout editing
Window setting menu
Parameter
Slot selection tabs
MV channel tabs
Layout editing area
Layout buttons

5-6-1. Setup Menu

Settings made by the following listed icons are applied to all split screens.
Icon
Frame
Title 1
Title 2
Audio level meter
Tally marker
Timecode
Alarm
Other settings
Slot selection tabs
Setup menu
area
Selects a slot where your MFR-16MV is installed. Click the relevant slot
tab to display slot card settings.
Selects an MV channel. Click the relevant channel tab. The current MV
channel settings are displayed.
Used for editing MV layouts. Pressing Send applies the current settings
to the MV output screen. If a window is located outside the active
display area, it turns orange.
Apart from the current layout, up to 16 layouts can be saved.
Hovering the mouse over layout buttons allows you to view layouts.
Displays window frame settings.
Displays Title 1 settings.
Displays Title 2 settings.
Displays audio level meter settings.
Displays tally marker settings.
Displays timecode settings.
Displays alarm display settings.
Displays video format and grid display settings.
61
Layout buttons
Description
Description