Advertisement
Quick Links
Advertisement
Related Manuals for FOR-A MFR-9SDI12G
Summary of Contents for FOR-A MFR-9SDI12G
- Page 1 INSTALLATION GUIDE MFR-9SDI12G MFR-9SDO12G MFR-8SDIEX MFR-8SDOEX Edition...
-
Page 2: Upon Receipt
Upon Receipt Unpacking MFR-9SDI12G/9SDO12G/8SDIEX/8SDOEX cards and their accessories are fully inspected and adjusted prior to shipment. Check your received items against the packing lists below. Check to ensure no damage has occurred during shipment. If damage has occurred, or items are missing, inform your supplier immediately. -
Page 3: Before Starting
MFR-9SDO12G/8SDOEX Up to 8 cards Standard SDI Signal Routing Matrix size varies depending on the number of installed MFR-9SDI12G and MFR-9SDO12G cards as shown below. (72 x 72 to 9 x 9) Number of cards: MFR-9SDO12G 72 x 72... - Page 4 1. I/ O Card Installation / Replacement IMPORTANT Contact FOR-A agent or service center for I/O Card installation and replacement work since such work should only be conducted by qualified technical personnel. 1-1. How to Install a New Card The following procedure shows how to install an output card into OUTPUT1 slot.
- Page 5 1-2. How to Replace a Card The following procedure shows how to replace a card in INPUT1 to a new input card. Detach all the BNC cables connected to the INPUT1 connector ports. ALARM SER IAL 232C REF IN INPUT OUTPUT INPUT1 slot Unfasten to remove four fixing screws along the front panel and detach the front panel.
- Page 6 2 Executive Drive, Suite 670, Fort Lee Executive Park, Fort Lee, NJ 07024, USA Tel: +1 201 944 1120 Fax: +1 201 944 1132 FOR-A Corporation of America Distribution & Service Center 2400 N.E. Waldo Road, Gainesville, FL 32609, USA Tel: +1 352 371 1505...