Table of Contents
Advertisement
6-3-6. Channel Name Import Commands (10)
K: commands allow you to import Source and Destination names from the device that sends K:
commands to the MFR system.
Command Format
Command
@[sp]K:<S or D><S or L or A><No>,<Dat>
Commands
BYTE No.
1
2
Command
@
[sp]
BYTE 5
<S or D> Select between S (Source) or D (Destination)
<S or L or A > Select the destination to which names are imported.
S: Source Name or Destination Name, ID Name (Kanji) fields on the WebGUI.
BYTE 6
L: Source Name or Destination Name, Import Name fields on the WebGUI.
A: Source Name or Destination Name, Name (ASCII) fields on the WebGUI.
<No.> Indicates the channel number.
BYTE 7-9
Source: 000-3FF、Destination: 000-1FF
<Dat> Indicates the channel names
BYTE 11-
Strings in Hex characters (max. 128 bytes). Character code: UTF-8
CR
Carriage return
Echo
Prompt
3
4
5
6
K
:
S
S
D
L
A
62
Command response
7-9
10
11-
000-3FF
,
000-1FF
CR
Advertisement
Table of Contents
