Table of Contents
Advertisement
6. Serial / LAN Command Control
Up to 20 external devices can be connected to an MFR Main Unit (including MFR-GPI serial ports)
through LAN or serial interface.
6-1. Serial Interface
Crosspoint switchover and tally output can be controlled via the SERIAL ports 1-4 on the MFR
Series main unit or MFR GPI.
6-2. LAN Interface
The MFR Series main unit is able to connect to a third-party automatic control system via the RJ-45
port (PC-LAN port). The TCP/IP communication protocol is supported. The control PC will be the
Client, and the MFR Series main unit will be the Server.
Server
MFR-6000
Client
No.1
Basic specifications
Item
IP address (PC-LAN port)
Port number
Number of PCs
Response / Resend
Login password
Communication protocol
Command protocol
*
When a redundant CPU is configured, a client should connect to both LAN ports (PC-LAN CPU1 and
PC-LAN CPU2) and send commands to the ports respectively. When the system functions normally, the
secondary port (PC-LAN CPU2) do not respond to commands. But if an error occurs in the CPU1
system, the secondary port will take over the primary port and respond to commands.
PC-LAN ポート
Client
No.2
Primary LAN (PC-LAN CPU1) default IP address: 192.168.0.12
Secondary LAN (PC-LAN CPU2) default IP address: 192.168.0.13*
(Subnet Mask: 255.255.255.0)
Setting range: 23, 49152 to 65534 (default: 23)
Max. 16
Wait before sending next command (Resend if the Echo is not
returned.)
None
TCP/IP, Control PC: Client, MFR-6000: Server
Crosspoint Remote Control using ASCII code.
Crosspoint Remote Control protocol
50
Web-based
Control
Hub
Client
No.**
Description
Advertisement
Table of Contents
