Channel Name Request Commands (7) - FOR-A MFR-1616 Operation Manuals

4-3-3. Channel Name Request Commands (7)

K? Commands allow you to obtain Source and Destination names in ASCII and/or in Kanji set
in the MFR Web-based Control menu.
Up to 32 channel names can be obtained per a single request.
Note that the number of request channels exceeds the system maximum size, no data will
return for the exceeded channels.
► See the [Web-based Control: SystemSize/LevelName page].
 Command Format
Command
@[sp]K?<SorD><AorK>,<Ofset>
Commands
BYTE No. 1 2
Command @ [sp]
Command response
BYTE No. 1 2
Response CR LF
BYTE 5
Command
Response
BYTE 6
Command BYTE8-10
Response BYTE7-9
Response BYTE11-
CR
Command
Response
LF
K:<SorD><AorK><No.>,<Dat>
3 4 5 6
K ? S A
D K
3 4 5 6
K : S A
D K
<S or D>
Select between S (Source) or D (Destination)
S: Source, D: Destination
<A or K>
Select A (Ascii) or K (Kanji) for names.
<Offset>
Specify the start number of channels.
Source: 000-07F, Destination: 000-03F
<No.>
Indicates the channel number.
Source: 000-07F, Destination: 000-03F
<Dat>
Indicates the channel name in Ascii or Kanji using hex
characters (max. 128 bytes).
Character code for Ascii names: Ascii
Character code for Kanji names: UTF-8
Carriage return
Line feed
41
Command response
7 8-10 11
, 000-07F CR
000-03F
7-9 10 11-
000-07F ,
000-03F
CR LF